FAST JOINING PRESS

Fast Joint presses for splicing thermoplastic conveyor and transmission belts

With the Fast Joint Kit CHIORINO t hermop lastic conveyor and t ransmission be lts can be made endless on site in a few minutes, reducing the machine downtime.

Advantages of the CHIORINO Fast Joint Kits:
EASE OF USE
▸ FAST EXECUTION
▸ NO USE OF CEMENTS
With the CHIORINO Fast Joint Kits P50 FJ and P120 FJ ther moplastic conveyor and transmission b elts can be spliced in just four very simple steps.
1. Place the prepared belt e nds on the holding board.
2. Cover with the holdin g plate and fasten with the clamps.
3. Press according to the time recommended by the operating manual.
4. Remove from press and cool in the cold clamp.

/p>

The photos refer to the P120 FJ kit, but the operations illustrated are also effective for
the P50 FJ kit.

Kit Fast Joint P50 FJ
Press with two heated platens, suitable for splicing CHIORINO thermoplastic conveyor and transmission belts, that are max. 40 mm wide and 3 mm thick.
TECHNICAL DATA
Kit Fast Joint P120 FJ
Press with two heated platens, suitable for splicing CHIORINO thermoplastic conveyor and transmission belts, that are max. 80 mm wide and 6 mm thick.
TECHNICAL DATA